LG-Ericsson iPECS ES-4526G, Installation Manual

Page: 53 / 98

C
HAPTER
3
| Installing the Switch
Connecting to the Console Port
– 53 –
ES-4550G / ES-4526G
C
ONNECTING TO THE
C
ONSOLE
P
ORT
1.
This port is used to connect a console device to the switch through a serial
cable. The console device can be a PC or workstation running a VT-100
terminal emulator, or a VT-100 terminal. A crossover RJ-45 to DB-9 cable is
supplied with the unit for connecting to the console port, as illustrated
below. The PIN assignments used to connect to the serial port are described
below.
Figure 21: Console Cable
W
IRING
M
AP FOR
S
ERIAL
C
ABLE
The serial port’s configuration requirements are as follows:
■
Default Baud rate—115,200 bps
■
Character Size—8 Characters
Table 8: Serial Cable Wiring
Switches 8-PIN Serial Port Null Modem PC’s 9-PIN DTE Port
6 RXD (receive data) <----------------------------- 3 TXD (transmit data)
3 TXD (transmit data) ------------------------------> 2 RXD (receive data)
5 SGND (signal ground) ------------------------------- 5 SGND (signal ground)
RJ-45 Connector
Console Port
DB-9 Port
aaa
aaa
aaa
aaa
aaa
aaa