C
HAPTER
3
| Installing the Switch
Connecting to a Power Source
– 34 –
ES-2024G/2024GP
4.
If installing multiple switches, attach four adhesive feet to each one.
Place each device squarely on top of the one below, in any order.
C
ONNECTING
TO
A
P
OWER
S
OURCE
To connect a switch to a power source:
1.
Insert the power cable plug directly into the AC inlet located at the back
of the switch.
Figure 17: Power Inlet
2.
Plug the other end of the cable into a grounded, 3-pin, AC power
source.
N
OTE
:
For International use, you may need to change the AC line cord. You
must use a line cord set that has been approved for the wall socket type in
your country.
3.
Check the front-panel LEDs as the device is powered on to be sure the
Power LED is on green. If not, check that the power cable is correctly
plugged in.
AC 100-240V, 50-60Hz, 3A
Summary of Contents for iPECS ES-2024G
Page 58: ...INDEX 58 ES 2024G 2024GP ...
Page 59: ......
