3.2 Cable connection
1
2
3
1. See 3.2.1. for Power Cable speci
fi
cations
a) Connect the ground wire to
terminal 1.
b) Connect the negative line of the
power cable to terminal 2.
c) Connect the positive line of the
power cable to terminal 3.
1234 56
2. See 3.2.1. for Communication Cable
speci
fi
cations
Install protection cover before turning on.
At
fi
rst, connect the ground wire to
terminal 2. Then, make connections
to the other terminals one after another.
4. Connecting the battery pack to the
inverter.
Refer to the installation instructions
for the inverter to connect the power
cable and communication cable to the
inverter.
Then, push the circuit breaker switch
up so that it is in the ON position.
Installation
24
Must turn o
ff
to reduce self-discharge
of battery during shipping and
storage.
3. Auxiliary power ON/OFF switch
(for shipping and storage)
Turn on the auxiliary power switch.
