52
Replace the Upper Tracking
14. Place the new Upper Tracking and its key in the Upper Pressure Cam Housing.
15. Insert two of the Perspex Support Columns into opposite corners of the Upper Pressure Cam
Housing.
16. Insert the Upper Pressure Cam Housing with the two opposite Perspex Support Columns into
the machine.
17. Insert the other two Perspex Support Columns into the machine and Upper Pressure Cam
Housing.
18. Tighten the Perspex Support Columns with the 450 mm adjustable wrench.
19. Tighten the four large nuts on the Perspex Support Columns with a socket wrench.
20. Reinsert the bearings and the bearings' cap on top of the Upper Pressure Cam Housing.
21. Tighten the four set screws on top of the Upper Pressure Cam Housing with an Allen key.
22. Insert an Upper Punch through the top of the Turret.
23. Place the Upper Punch's head on the new Upper Tracking.
23.1 Note: Be sure that the Upper Punch's head is above the new Upper Tracking to
prevent damage.
24. Rotate the Handle until the next Upper Punch can be inserted.
25. Repeat steps 22-24 until all the Upper Punches are inserted into the Turret.
25.1 Note: Manually turn the RTP 118
®
Turret for a couple of rotations to ensure that the
Upper Punches are situated correctly.
