Manual CT26-15 - LFB
28
7.
SAFETY – RECOMMENDATIONS
Regularly check the following:
The clamping of the wheel (18 to 25 Nm for the front, 30 to 40 Nm for the back).
The tire wear (replace the tire when the wear indicator is reached) and adjust the pressure between 60-65
psi - 2.8 to 4.5 bar. The tires of your bicycle are compatible with the rims funds, no changes should be made
there, only the appropriate spare parts (tires, tubes, brake friction components etc ...) are taken into account.
Contact your dealer for more information.
Check the tightness of the direction (18-25 Nm), pedals (18-25 Nm) of the saddle (18-25 Nm).
Because of its weight and inertia due to the motor, widely expect the braking distance of your electric bike,
especially in rainy weather.
Your electric bike is a bike suitable for use in the city and for hiking on the road.
r
d
o
not
use
it
as
a
Mountain
bike
.
On the highway, a person riding a bicycle must respect and apply the requirements of the code of the country
road where it is located and the legal requirements for this type of transport. (eg lighting, signage, helmet
(recommended) reflecting device etc ...).
For safe use of your bicycle we recommend that you periodically check and control: the brakes (brake pads for
wear) the condition of the rims and spokes (rim wear and rays) the condition of the tires, steering (fasteners,
tightening the wheel nuts) and any other specific organs in your vehicle. Rims must be smooth, without
cracks, breakage or deformation. If you notice any changes on the rims, please revise them immediately.
WARNING !
Like any mechanical component, a bicycle is subjected to high stresses and wears. The various
materials and components can react differently to wear or fatigue. If the expected life of a component is
exceeded, it may break at once, so that may cause injury to the rider. Cracks, scratches and discoloration
in areas subject to high stresses indicate that the component has exceeded its useful life and should be
replaced.
It is also important for your security to replace critical components show wear or other problems (tires, rims,
etc ...) with original pieces. Talk to your dealer.
r
d
o
not
sit
on
the
bike
when
it
is
held
by
the
kickstand
,
it
May
break
and
you
could
suddenly
Fall
down
.
Stay alert, do not dwell on the consultation of the screen of the bicycle when riding.
For safety, it is advisable to always turn on the lighting of the bicycle.
Wearing a helmet is strongly recommended.
Wearing a safety jacket is mandatory in cases of extra-urban traffic at night, or the day when visibility is poor.
