GA01300_0902 - 04/2006 - © by Leybold Vacuum
38
Maintenance
5.9
Removing and Remounting the
Pump Module
Required tools: Allen keys size 3, 4, 6 and 8 mm, box wrench size 10, pos-
sibly pliers, torque wrench.
Required spare parts:
Gaskets:
200 10 736
200 10 737
Removing the Pump Module
Drain the oil and remove the oil case (see Chapter 5.6).
Unscrew the hex. nuts (14/1).
Pull the entire pump module (14/2) forward off the tie rods (14/6).
When doing so, ensure that the individual pin-fitted parts are not
loosened. Further disassembly of the pump module should only
be carried out by a trained service engineer.
Remove the gasket (14/4).
Remove the coupling element (14/5).
Fig. 14 Removing and remounting the pump module
Key to Fig. 14
1 Hex. nuts
2 Pump module
3 Washer
4 Gasket
5 Coupling element
6 Tie rods
Caution
