Lexus UX200 2021, Manual

Page: 238 / 456

238
4-5. Using the driving support systems
■
When the vehicle moves in the
unintended direction due to the
wrong shift position being selected

P.221
Types of sensors
WARNING
■ To ensure the Parking Support Brake
(static objects) can operate properly
Observe the following precautions
regarding the sensors (

P.221). Failure
to do so may cause a sensor to not oper-
ate properly, and may cause an accident.
● Do not modify, disassemble or paint
the sensors.
● Do not replace a sensor with a part
other than a genuine part.
● Do not subject a sensor or its sur-
rounding area to a strong impact.
● Do not damage the sensors, and
always keep them clean.
■ Handling the suspension
Do not modify the suspension, as
changes to the height or inclination of the
vehicle may prevent the sensors from
detecting objects correctly or cause the
system to not operate or operate unnec-
essarily.
■ If the Parking Support Brake function
(static objects) operates unnecessar-
ily, such as at a railroad crossing
In the event that the Parking Support
Brake function (static objects) operates
unnecessarily, such as at a railroad cross-
ing, brake control will be canceled after
approximately 2 seconds, allowing you
to proceed forward and leave the area,
brake control can also be canceled by
depressing the brake pedal. Depressing
the accelerator pedal after brake control
is canceled will allow you to proceed for-
ward and leave the area.
■ Notes when washing the vehicle
Do not apply intensive bursts of water or
steam to the sensor area.
Doing so may result in the sensor mal-
functioning.
● When using a high pressure washer to
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
sensor to malfunction.
● When using steam to clean the vehi-
cle, do not direct steam too close to
the sensors as doing so may cause a
sensor to malfunction.
■ When to disable the Parking Support
Brake (static objects)
In the following situations, disable the
Parking Support Brake (static objects) as
the system may operate even though
there is no possibility of a collision.
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
roller
● When loading the vehicle onto a boat,
truck or other transport vessel