Lexus UX 250h 2020, Owner'S Manual

Page: 87 / 480

85
2-1. Instrument cluster
2
V
eh
icle
st
at
us
in
fo
rmat
ion
an
d
in
dica
tor
s
■ Engine speed
On hybrid vehicles, engine speed is pre-
cisely controlled in order to help improve
fuel efficiency and reduce exhaust emis-
sions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
■
Hybrid System Indicator is displayed
when
The Hybrid System Indicator is displayed in
the following situations:
●
The shift lever is in D or S.
● The driving mode is other than Sport
mode.
■ Outside temperature display
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to your Lexus dealer.
■ Speed unit setting for the speedometer
When the speed unit has been changed
from the default setting, the vehicle speed in
the default unit is also displayed in the
meter.
■ Liquid crystal display

P.88
■
Customization
The gauges and meters can be customized
on
of the multi-information display.
(

P.435)
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator of the tachom-
eter enter the red zone, which indi-
cates the maximum engine speed.
●
The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H). In this case, imme-
diately stop the vehicle in a safe place,
and check the engine after it has
cooled completely. (

P.410)