Lexus RX400h2006, Owner'S Manual

Page: 469 / 639

STARTING AND DRIVING
442
(g) Conventional cruise control mode failure warning
1 “CRUISE” indicator light
2 Warning message
3 Master warning light
If a system malfunction is detected when the conventional
cruise control mode is on, the “CRUISE” indicator light in the
instrument cluster flashes, the master warning light comes on,
a warning tone sounds and the warning message “CHECK
CRUISE SYSTEM” appears on the display.
If this message appears, turn the system off and then on again.
If the setting still cannot be made or the same message
appears again, the system might have malfunctioned.
Although there is no problem to continue driving, please
contact your Lexus dealer.
REAR VIEW MONITOR SYSTEM
The rear view monitor system assists the driver by
displaying an image of the rear of the vehicle while
backing up. The displayed image on the screen is a
horizontally reversed mirror image of the inside rear view
mirror.
To display the rear view image on the screen, place the
selector lever in the “R” position when the ignition switch
is in the “ON” position.
If you move the selector lever out of the “R” position, the screen
returns to the previous screen. Operating another function of
the navigation system will display another screen.
The rear view monitor system is a supplemental device
intended to assist back up. When backing up, be sure to check
behind and all around the vehicle visually.