a) Push the lever toward you and check that washer fluid
squirts onto the proper area of the windshield and that
wipers are activated. Wipers will make one additional
pass after a 3-second delay.
b) Check wiper speed operation on mist, intermittent, low
and high cycles. Check that the wiper blades wipe off
the washer fluid cleanly.
c) The wipers should not make any abnormal noise when
operating.
NOTE:
• Intermittent Type --- The frequency of the intermittent
wiper can be adjusted by turning the knob.
• Rain-Sensing Type --- The sensitivity of the sensor
can be adjusted by turning the knob.
• Add washer fluid up to the proper level.
Rain-Sensing Type
d) With the wiper switch lever in the “AUTO” position,
splash the water on the windshield around the
windshield sensor and check that the wipers operate
.
Intermittent Type
Rain-sensing Type
WINDSHIELD WIPERS AND WASHER
With the “ENGINE” switch in the “IG-ON” mode:
18
RC350/RCF
INSPECTION DETAILS - C. LEFT FRONT
