Lexus NX 300h 2016, Owner'S Manual

Page: 224 / 680

224
4-3. Operating the lights and wipers
NX300h_OM_USA_OM78082U
When all of the following conditions are fulfilled, high beam will be automatically
turned on:
●
Vehicle speed is above approximately 21 mph (34 km/h).
●
The area ahead of the vehicle is dark.
●
There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
●
There are few streetlights on the road ahead.
If any of the following conditions are fulfilled, high beam will be automatically
turned off:
●
Vehicle speed drops below approximately 17 mph (27 km/h).
●
The area ahead of the vehicle is not dark.
●
Oncoming or preceding vehicles have headlights or tail lights turned on.
●
There are many streetlights on the road ahead.
■
Switching to low beam
Pull the lever to original position.
The Automatic High Beam indicator
will turn off.
Push the lever away from you to acti-
vate the Automatic High Beam sys-
tem again.
■
Switching to high beam
Press the Automatic High Beam
switch.
The Automatic High Beam indicator
will turn off and the high beam indi-
cator will turn on.
Press the switch to activate the Auto-
matic High Beam system again.
High beam automatic turning on or off conditions
Turning the high beam on/off manually