manualshive.com logo in svg

Lexus LX 470, Owner'S Manual

Share
Download
Lexus LX 470 Owner'S Manual Download Page 314

ENGINE

298

Take care not to spill gasohol during refueling.
Gasohol may cause paint damage.

Fuel tank capacity

96 L (25.4 gal., 21.1 lmp.gal.)

FACTS ABOUT ENGINE OIL

CONSUMPTION

Functions of engine oil

Engine oil has the primary function of lubricating and cooling
the inside of the engine, and plays a major role in maintaining
the engine in proper working order.

Engine oil consumption

It is normal that an engine should consume some engine
oil during normal engine operation.  The causes of oil
consumption in a normal engine are as follows.

Oil is used to lubricate pistons, piston rings and cylinders.
A thin film of oil is left on the cylinder wall when a piston
moves downwards in the cylinder.  High negative pressure
generated when the vehicle is decelerating sucks some of
this oil into the combustion chamber.  This oil as well as
some part of the oil film left on the cylinder wall is burned by
the high temperature combustion gases during the
combustion process.

Oil is also used to lubricate the stems of the intake valves.
Some of this oil is sucked into the combustion chamber
together with the intake air and is burned along with the fuel.
High temperature exhaust gases also burn the oil used to
lubricate the exhaust valve stems.

The amount of engine oil consumed depends on the
viscosity of the oil, the quality of the oil and the way the
vehicle is driven.

More oil is consumed by high−speed driving and frequent
acceleration and deceleration.

A new engine consumes more oil, since its pistons, piston rings
and cylinder walls have not become conditioned.

When judging the amount of oil consumption, keep in
mind that the oil may have become diluted, making it
difficult to judge the true level accurately.

For example, if a vehicle is used for repeated short trips and
consumes a normal amount of oil, the dipstick may not show
any drop in the oil level at all, even after 1000 km (600 miles)
or more.  This is because the oil is gradually becoming diluted
with fuel or moisture, making it appear that the oil level has not
changed.

The diluting ingredients evaporate out when the vehicle is then
driven at high speeds, as on an expressway, making it appear
that oil is excessively consumed after driving at high speeds.

Summary of Contents for LX 470


















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands