Lexus LX 470 1998, Owner'S Manual

Page: 109 / 337

COMFORT ADJUSTMENT
92
D
Replace the belt assembly (including bolts) if it has been
used in a severe impact. The entire assembly should be
replaced even if damage is not obvious.
Fastening front, second and third (outside seats)
seat belts
16X017b
Adjust the seat as needed and sit up straight and well back in the
seat. To fasten your belt, pull it out of the retractor and insert the
tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size and the seat
position.
The retractor will lock the belt during a sudden stop or on impact.
It also may lock if you lean forward too quickly. A slow, easy motion
will allow the belt to extend, and you can move around freely.
When a passenger’s shoulder belt is completely extended and is then
retracted even slightly, the belt is locked in that position and cannot
be extended. This feature is used to hold the child restraint system
securely. (For details, see ”Child restraint” on page 107.) To free the
belt again, fully retract the belt and then pull the belt out once more.
If the seat belt cannot be pulled out of the retractor, firmly pull the
belt and release it. You will then be able to smoothly pull the belt out
of the retractor.
CAUTION
D
After inserting the tab, make sure the tab and buckle are
locked and that the belt is not twisted.
D
Do not insert coins, clips, etc. in the buckle as this may
prevent you from properly latching the tab and buckle.
D
If the seat belt does not function normally, immediately
contact your Lexus dealer. Do not use the seat until the seat
belt is fixed. It cannot protect an adult occupant or your
child from injury.