Lexus GS430 User Manual Download Page 100

Page: 100 / 632

GAUGES, METERS AND SERVICE REMINDER INDICATORS

IF THIS INDICATOR OR

BUZZER COMES ON ...

DO THIS.

(p)

Key reminder
buzzer

Turn off the engine
switch.

(a) Brake System Warning Light (red) and

Buzzer

This light comes on in the following cases when the engine
switch is selected in “IG

−

ON” mode.

When the parking brake is applied ...

GS430—This light comes on for a few seconds when the
engine is started even after the parking brake is released.

GS300—This light comes on for a few seconds when the
engine switch is selected in “IG

−

ON” mode even after the

parking brake is released.

If you drive your vehicle without releasing the parking brake,
the buzzer sounds and the message “PARK BRAKE” appears
on the multi

−

information display.

When the brake fluid level is low ...

CAUTION

It is dangerous to continue driving normally when the
brake fluid level is low.

Have your vehicle checked at your Lexus dealer in the
following case:

The light does not come on even if the parking brake is
applied when the engine is started.

The light does not come on even if the engine is started with
the parking brake released.

Summary of Contents for GS430

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands

Lexus GS430, User Manual

Search results

Summary of Contents for GS430

Reviews:

Related manuals for GS430

Brands by name

Popular brands