133
3-2. Opening, closing and locking the doors and trunk
3
O
per
at
io
n o
f ea
ch
co
m
po
nen
t
GS350_250_OM_OM30E16E_(EE)
■
Battery-saving function (vehicles with entry function)
The battery-saving function will be activated in order to prevent the electronic key
battery and the vehicle battery from being discharged while the vehicle is not in
operation for a long time.
●
In the following situations, the smart entry & start system may take some time to
unlock the doors.
• The electronic key has been left in an area of approximately 2 m (6 ft.) of the
outside of the vehicle for 10 minutes or longer.
• The smart entry & start system has not been used for 5 days or longer.
●
If the smart entry & start system has not been used for 14 days or longer, the doors
cannot be unlocked at any doors except the driver’s door. In this case, take hold of
the driver’s door handle, or use the wireless remote control or the mechanical key,
to unlock the doors.
■
Electronic Key Battery-Saving Function
When battery-saving mode is set, battery depletion is minimized by stopping the
electronic key from receiving radio waves.
Press
twice while pressing and holding
. Confirm that the electronic key indi-
cator flashes 4 times.
While the battery-saving mode is set, the
smart entry & start system cannot be used. To
cancel the function, press any of the elec-
tronic key buttons.
GS350_250_OM_OM30E16E_(EE).book Page 133 Tuesday, July 8, 2014 7:11 PM
