
116
2. Instrument cluster
GS350_250_OM_OM30E16E_(EE)
■
Head-up display
●
The head-up display may seem dark and hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
●
When the head-up display is turned off, it will remain off even if the engine switch is
turned to IGNITION ON mode after the engine switch has been turned off.
●
The startup image will be displayed on the head-up display after the engine switch
has been turned to IGNITION ON mode while the head-up display switch is set to
on.
■
When the battery is disconnected
The customize settings of the head-up display will be reset.
CAUTION
■
Before using the head-up display
Check that the position and brightness of the head-up display image does not
interfere with safe driving. Incorrect adjustment of the image’s position or bright-
ness may obstruct the driver’s view and lead to an accident, resulting in death or
serious injury.
NOTICE
■
To prevent damage to components
●
Do not place any drinks near the head-up
display projector. If the projector gets wet,
electrical malfunctions may result.
●
Do not place anything on or put stickers
onto the head-up display projector.
Doing so could interrupt head-up display
indications.
●
Do not touch the inside of the head-up dis-
play projector or thrust sharp edges or the
like into the projector.
Doing so could cause mechanical malfunc-
tions.
GS350_250_OM_OM30E16E_(EE).book Page 116 Tuesday, July 8, 2014 7:11 PM