a) Pull the lever toward you and check that washer fluid
squirts onto the proper area of the windshield and that
wipers are activated. Wipers will make one additional
pass after a short delay.
b) Check wiper speed operation on all settings. Check that
the wiper blades wipe off the washer fluid cleanly.
c) The wipers should not make any abnormal noise when
operating.
NOTE:
• Intermittent type - The frequency of the intermittent
wiper can be adjusted by turning the knob.
• Rain-sensing type - The sensitivity of the sensor can
be adjusted by turning the knob.
• Add washer fluid up to the proper level.
WINDSHIELD WIPERS AND WASHER
With the engine switch in ON mode:
* If equipped
1
“OFF” - Move lever up two levels
2
Move lever up one level
3
Move lever down one level
4
“HI” - Move lever down two levels
AUTO mode on/off switch*
5
Intermittent type*
Rain-sensing type*
20
GS200t/350/450h/F
INSPECTION DETAILS - C. LEFT FRONT