Lexus GS 350, Owner'S Manual, Page: 91 / 831

GS350_U (OM30C34U)
89
2. Instrument cluster
2
In
st
ru
m
en
t cl
uste
r
■
Tire inflation pressure (if equipped)
●
It may take a few minutes to display the tire inflation pressure after the engine
switch is turned to IGNITION ON mode. It may also take a few minutes to display
the tire inflation pressure after inflation pressure has been adjusted.
●
“---” may be displayed if the tire information cannot be determined due to unfavor-
able radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may also be
different from the values measured using a tire pressure gauge.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is character-
istic of liquid crystal displays, and there is no problem continuing to use the display.
■
Customization
Setting of available languages can be changed. (Customizable features
→
P. 777)
CAUTION
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal informa-
tion display. At extremely low temperatures, the information display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, caus-
ing rapid and excessive engine braking and possibly an accident resulting in death
or injury.
■
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such as a
garage, exhaust gases including harmful carbon monoxide (CO) may collect and
enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■
During setting up the display
To prevent battery discharge, ensure that the engine is running while setting up the
display features.