manualshive.com logo in svg

Lexus GS 350, Owner'S Manual, Page: 492 / 831

Share
Download
Lexus GS 350 Owner'S Manual Download Page 492

490

GS350_U (OM30C34U)

5-4. Using the hands-free phone system (for cellular phone)

■

Compatible models

This system supports the following service.

●

Bluetooth

®

 Specification Ver. 1.1 or higher (Recommended: Ver. 2.1+EDR or

higher)

●

Profiles
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.5 or higher)
• OPP (Object Push Profile) Ver. 1.1 or higher
• PBAP (Phone Book Access Profile) Ver. 1.0 or higher
• MAP (Message Access Profile) Ver. 1.0 or higher
• SPP (Serial Port Profile) Ver. 1.1 or higher

*

*

: This profile is necessary when using Apps. For details, refer to the “Navigation

System Owner’s Manual”

If your cellular phone does not support HFP, you cannot enter the Bluetooth

®

phone, and take OPP, PBAP, MAP or SPP service individually.
If the connected Bluetooth

®

 phone version is older than recommended or incom-

patible, this function may not be used.
Please go to http://www.lexus.com/ to find approved Bluetooth

®

 phones for this

system.

■

Certification

FCC ID:AJDK041
IC:775E-K041
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device. 
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR
d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploita-
tion est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectri-
que subi, même si le brouillage est susceptible d’en compromettre le fonctionne-
ment.
For vehicles sold in Canada:
This device complies with RSS-310 of Industry Canada. Operation is subject to the
condition that this device does not cause harmful interference. 
Cet appareil est conforme au CNR-310 d’Industrie Canada. Son exploitation est
autorisée sous réserve que l’appareil ne cause pas de brouillage préjudiciable.

Summary of Contents for GS 350
































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments