INTERIOR PARTS FOR DAMAGE AND FIT
Visually inspect the following interior parts for dirt, damage,
and proper fit and alignment:
a ) Instrument panel, dashboard and glove box
b ) Roof headliner, pillar, roof side garnish and sun visors
c ) Door trim and quarter trim panels
d ) Seat upholstery and floor carpeting
e ) Console box
f ) Steering wheel
FLOOR MATS
Check that the floor mats are designed specifically for this
vehicle. Fix them securely in place onto the carpet.
PRE-COLLISION BRAKING*
Check that the “PCS” warning light turns on when pre-
collision braking is disabled.
Pre-collision braking disabled.
Pre-collision braking enabled.
ON-BOARD DIAGNOSTIC SYSTEM
OPERATION
Using the “Techstream”, check the on-board diagnostic
system function. For details, refer to the engine
troubleshooting section of the
Repair Manua
l.
ACTIVATION AND INITIALIZATION OF TIRE
PRESSURE WARNING SYSTEM
Refer to service bulletin
1
2
* If equipped
*
C
M
Y
CM
MY
CY
CMY
K
Floor mat_U.PDF 1 4/1/13 4:59 PM
19
CT 200h
INSPECTION DETAILS - C. LEFT FRONT
Summary of Contents for CT 200H 2014
