Lexus 2015 NX 200t, Owner'S Manual

Page: 93 / 681

93
2. Instrument cluster
2
Instrument cl
uste
r
NX200t_OM_USA_OM78145U
■
Elapsed time (after reset
* 2
/after start)
* 1
Displays the elapsed time since the function was reset and the engine was
started, respectively
■
Distance (driving range/after start)
* 1
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining and the distance driven after the engine was started respec-
tively.
• This distance is computed based on your average fuel consumption. As a result,
the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be
updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning
the engine switch off, the display may not be updated.
■
Eco Driving Indicator Zone Display
→ P. 94
■
Boost Meter/Oil Temperature Gauge/Oil Pressure Gauge (if equipped)
Boost Meter:
Displays the boost pressure. The display changes colors when the set pres-
sure is exceeded.
Oil Temperature Gauge:
Displays the temperature of the engine oil. The display flashes when the
engine oil exceeds 284°F (140°C). (
→ P. 579)
Oil Pressure Gauge:
Displays the oil pressure for the engine interior. A buzzer sounds and warning
message is displayed when the oil pressure gets low. (
→ P. 579)
Depending on the road conditions, temperature, vehicle speed, etc., the actual
vehicle condition on the display screen may differ.
Use the display screen as a reference.
■
G monitor (if equipped)
Displays the acceleration forces of the front, back, left and right of the vehicle.
Also displays the turning angle of the steering wheel, brake oil pressure,
accelerator opening.
• The actual vehicle conditions may differ from those on the display screen, depend-
ing on the road conditions, outside temperature, vehicle speed, etc.
Use the display screen as a reference.
• If a battery terminal is disconnected and reconnected, the steering amount display
may be disabled temporarily. After driving the vehicle for a while, the display will
be enabled.