Lexus 2015 NX 200t, Owner'S Manual

Page: 125 / 681

125
3-2. Opening, closing and locking the doors
3
Op
era
tio
n of
ea
ch
co
m
po
ne
nt
NX200t_OM_USA_OM78145U
■
Back door closer (vehicles with a power back door)
In the event that the back door is left slightly open, the back door closer will automatically
close it to the fully closed position.
Whatever the state of the engine switch, the back door closer operates.
■
Operation of the power back door (vehicles with a power back door)
●
A buzzer sounds and the emergency flashers flash twice to indicate that the back door
is opening/closing.
●
When the power back door operations are OFF, the power back door does not oper-
ate but it can be opened and closed by hand.
●
When the power back door automatically opens, if an abnormality due to people or
objects is detected, operation will stop.
■
Back door reserve lock function (vehicles with a power back door)
This function is a function which reserves locking of all doors, beforehand, when the back
door is open. When the follow is done, all the doors except the back door are locked and
then back door will also be locked at the same time it is closed.
Close all doors, except the back door.
Push the wireless lock button during the automatic closing operation of the back door.
■
When reconnecting the battery (vehicles with a power back door)
To enable the power back door to operate properly, close the back door manually.
■
Jam protection function (vehicles with a power back door)
■
Returning the back door automatic stop position to the initial settings (vehicles with a
power back door)
■
Customization (vehicles with a power back door)
Settings (e.g. back door automatic open and stop position) can be changed.
(Customizable features:
→
P. 636)
Sensors are installed in the right and left sides of
the power back door. When the door is auto-
matically closing and the sensors are pushed
due to an object being clamped, etc., the jam
protection function operates.
From that position the door automatically
moves a little in the opposite direction and then
the function stops.
Press and hold the power back door switch on
the back door for 7 seconds.
After the buzzer sounds 4 times, it sounds
twice more. When the power back door does
the opening operation the next time, the door
will open to the initial settings position.
1
2