Instructions for
MR-6
MR
MR
Receiver
-6
-6
Dear Customer,
Thank you for purchasing our single conversion receiver MR6. Because of its small size and low weight it is perfectly
suited for small models, but it can be used also in larger models.
Features
The SMD technology allows for smallest size at lowest possible weight. This high quality receiver has high interfe-
rence suppression and can be used with our standard Lexors receiver crystals.
Operation
Important! You must follow this sequence:
1.
First switch on the transmitter, than the receiver
2.
First switch off the receiver, than the transmitter
Technical specifications
- Number of channels:
6
- Size:
40 x 26 x 11 mm
(1.6 x 1 x 0.4 in)
- Weight:
14 g (0.5 oz)
- Frequencies available:
35, 40 MHz
(depending on regulations in your country)
- Operational voltage:
3.5 – 6.3 V
- Current consumption:
8,5 mA
- Servo connectors:
Lexors, Futaba, Hitec, JR
- Temperature range:
-10 to +40 degree C
(14 – 104 degrees F)
Receiver circuitry
Up to 6 servos can be connected to the receiver. If all
channels are occupied, the power supply can be secured
via a Y-cable on any channel.
Antenna
Place the receiver in your model in cushioning foam as far away as possible from and life wires.
In fuselages containing conducting material (such as carbon fibers) run the antenna out of the fuselage as close to
the receiver as possible. Avoid running the antenna alongside the fuselage or wing panels. Best reception is gua-
ranteed by letting the antenna dangle free from the fuselage.
Many pleasant flights and happy landings with your MR 6 receiver.
Your IKARUS Team
www.ikarus.net
# 173651 (35 MHz)
# 173661 (40 MHz)
1
2
3
4
5
6
MR
-
6
35 M
Hz
crystal
brown/ black
(negative)
red (positive)
orange/ white
(signal)
Channel 6 Channel 5 Channel 4 Channel 3 Channel 2 Channel 1
1
2
3
4
5
6
3
5
M
H
z
m
r-
6
sin
gle
con
ver
sio
n
nar
row b
and
6 c
han
nel F
M
rec
eiv
er
#17
365
1
