Check the headlamps
NOTES ON MAINTENANCE
- Start the scooter and run the engine.
- Activate the dipped beam.
- Use a screwdriver to adjust the screws (1)
for the vertical and horizontal angle of the
illuminated surface area of the road top for
the headlamp.
NOTE
If you have problems adjusting the head-
lamps, see a specialised dealer.
An incorrect adjustment is punishable by
law. Remember, you are responsible for
the correct adjustment of the motorbike
,
s
headlamp.
WARNING
Do not run the engine in an enclosed sp-
ace (risk of asphyxiation).
Position the motorcycle on a level floor 5 m
(measured from the headlamp) from a light
coloured wall with a rider seated on the mo-
torcycle and the tyres filled at the correct p-
ressure.
- Measure the distance from the floor to the
centre of the headlamp and mark the heig-
ht on the wall with a cross. Draw a second
cross 12 cm beneath the first cross.
Adjusting the headlamps
H
5m
H
1
41
