Lexmark XM7100 Series User Manual Download Page 310

Page: 310 / 388

Unsupported option in slot [x] [55]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the unsupported option card from the printer controller board, and then replace it with a
supported card.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

USB port [x] disabled [56]

From the printer control panel, touch

Continue

to clear the message.

Notes:

•

The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu is not set to Disabled.

Weblink server not set up. Contact system administrator.

From the printer control panel, touch

Continue

to clear the message.

Note:

If the message appears again, then contact your system support person.

Solving printer problems

•

“Basic printer problems” on page 310

•

“Hardware and internal option problems” on page 313

•

“Paper feed problems” on page 316

Basic printer problems

The printer is not responding

Action

Yes

Step 1

Make sure the printer is turned on.

Is the printer turned on?

Go to step 2.

Turn on the printer.

Step 2

Check if the printer is in Sleep mode or Hibernate mode.

Is the printer in Sleep mode or Hibernate mode?

Press the Sleep
button to wake the
printer from Sleep
mode or Hibernate
mode.

Go to step 3.

Troubleshooting

310

Summary of Contents for XM7100 Series





































































































































































































































































































































































































Search results

Summary of Contents for XM7100 Series

Reviews:

Related manuals for XM7100 Series

Brands by name

Popular brands

Lexmark XM7100 Series, User Manual

Search results

Summary of Contents for XM7100 Series

Reviews:

Related manuals for XM7100 Series

Brands by name

Popular brands