Use
To
Contrast
0–5
Best for content
Specify the contrast of the output.
Note:
Best for content is the factory default setting.
Mirror Image
Off
On
Create a mirror image of the original document.
Note:
Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note:
Off is the factory default setting.
Shadow Detail
‑
4 to 4
Adjust the amount of shadow detail visible on a scanned image.
Note:
0 is the factory default setting.
Scan edge to edge
Off
On
Specify whether the original document is scanned edge-to-edge.
Note:
Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness on a scanned image.
Note:
3 is the factory default setting.
Temperature
‑
4 to 4
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Print Settings
Use
To
Copies
1–999
Specify a default number of copies for each print job.
Note:
1 is the factory default setting.
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Set a default paper source for all print jobs.
Note:
Tray 1 is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note:
(1,2,3) (1,2,3) is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Enable two-sided printing for incoming print jobs.
Note:
1 sided is the factory default setting.
Duplex Binding
Long Edge
Short Edge
Define binding two
‑
sided pages in relation to page orientation.
Notes:
•
Long Edge sets binding along the long edge of the page (left edge for portrait and
top edge for landscape). This is the factory default setting.
•
Short Edge sets binding along the short edge of the page (top edge for portrait
and left edge for landscape).
Understanding the printer menus
213