Lexmark XC9225 User Manual Download Page 25

Page: 25 / 338

Notes:

•

You can add up to 10 images.

•

When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud

‑

based notiﬁcations.

Apply the changes.

Changing the wallpaper image

From the home screen, touch

Change Wallpaper

Select an image to use.

Apply the changes.

Running a slide show from a ﬂash drive

Insert a ﬂash drive into the USB port.

From the home screen, touch

Slideshow

Images appear in alphabetical order.

Note:

You can remove the ﬂash drive after the slide show starts, but the images are not stored in the

printer. If the slide show stops, then insert the ﬂash drive again to view the images.

Managing bookmarks

Creating bookmarks

Use bookmarks to print frequently accessed documents that are stored in servers or on the web.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Bookmarks

Add Bookmark

, and then type a bookmark name.

Select an Address protocol type, and then do one of the following:

•

For HTTP and HTTPS, type the URL that you want to bookmark.

•

For HTTPS, make sure to use the host name instead of the IP address. For example, type

myWebsite.com/sample.pdf

instead of typing

123.123.123.123/sample.pdf

. Make sure that

the host name also matches the Common Name (CN) value in the server certiﬁcate. For more information
on obtaining the CN value in the server certiﬁcate, see the help information for your web browser.

•

For FTP, type the FTP address. For example,

myServer/myDirectory

. Enter the FTP port. Port 21 is

the default port for sending commands.

•

For SMB, type the network folder address. For example,

myServer/myShare/myFile.pdf

. Type the

network domain name.

•

If necessary, select the Authentication type for FTP and SMB.

Setting up and using the home screen applications

Summary of Contents for XC9225



















































































































































































































































































































































Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands

Lexmark XC9225, User Manual

Search results

Summary of Contents for XC9225

Reviews:

Related manuals for XC9225

Brands by name

Popular brands