Lexmark XC6100 Series User Manual Download

Page: 131 / 177

Light print

Action

Yes

Step 1

From the Quality menu on the control panel, select

Color

Adjust

Resend the print job.

Is the print still too light?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, increase the toner
darkness from the Printing Preferences or Print dialog.

Note:

You can also change the settings on the printer control

panel.

Resend the print job.

Is the print still too light?

Go to step 3.

The problem is
solved.

Step 3

Depending on your operating system, specify the paper type,
texture, and weight from the Printing Preferences or Print
dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Resend the print job.

Is the print still too light?

Go to step 4.

The problem is
solved.

Step 4

Make sure that the paper has no texture or rough ﬁnishes.

Are you printing on textured or rough paper?

Change the texture
settings to match the
paper you are
printing on.

Go to step 5.

Troubleshooting

131

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands