12
IPDS Printer and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server
8
Save/submit any changes and return to the
Ready
screen.
9
To verify the new print server settings, print a Network Setup Page. Using the control panel
MENU/Menus
,
select
Reports > Network Setup Page
. Note that the
Network Job Timeout
is identified as
End-of-job
Timeout
on this report.
Step 5
Select the IPDS Emulation, Bar Code Size, Host Resolution, and Fax Interrupt
Settings
It is important to select the correct emulation in the printer IPDS MENU before sending IPDS jobs.
Guidelines for Choosing the IPDS Emulation Setting
The
IPDS Emulation
, the
BAR CODE
and
Host Resolution
options are found in the printer control panel
under
MENU/Menus > Option Card Menu > IPDS MENU > EMULATION
.
1
"Resident" is the default setting. If you are replacing a printer that used a Native Emulation setting,
"Resident" is the recommended emulation.
2
If you are replacing a printer that used a 4028 Emulation setting, choose the "Resident" Emulation and
change the following settings:
a)
Set
Bar Code Size
to "4028" under
BARCODE > Bar Code Size
.
b)
The recommended
Host Resolution
setting is "Auto". If you experience printing problems, set Host
Resolution to "300".
3
If you are replacing a printer that used a 43xx Emulation setting, choose the "Resident" Emulation and
change the following settings:
a)
Set
Bar Code Size
to "43xx" under
BAR CODE > Bar Code Size
.
b)
The recommended
Host Resolution
setting is "Auto". If you experience printing problems, set Host
Resolution to "300".
Enable RARP
On
or
Off
(On, if you use a RARP server.)
(Off, if you set the IP address another way.)
Enable BOOTP
On
or
Off
(On, if you use a BOOTP server.)
(Off, if you set the IP address another way.)
Enable AutoIP
Yes
or
No
(Default is Yes. This is the recommended setting.)
WINS Server Address
157.184.100.20
(Address of your WINS Server)
DNS Server Address
157.184.115.7
(Address of your DNS Server)
TCP/IP Settings
Parameter
Value
