Understanding the RFID menu
Configuring RFID-specific settings
The RFID menu is used to configure RFID-specific settings. It is located on the operator panel between the Help and
Network/Ports menus.
Note: RFID settings appear on the menu settings page. For information on printing a menu settings page, see the User's
Guide available on the Software and Documentation CD.
Press
to access the Menu options. Select RFID Menu from the list.
The RFID Menu setting appears.
RFID Settings
Retry Count
Stop on Error
Mark on Error
Reset Label Count
RFID settings menu
Use the “RFID” Menu to define the following:
•
Labels loaded in each label tray
•
Default label source
•
Output bin
Retry count
Menu selection Purpose
Option Comments
Retry Count
Determines how many times to retry programming anew label
when label fails to program. A retry will occur on a new RFID
sheet
0–255
Zero is the default value.
Stop on Error
Menu selection Purpose
Option Comments
Stop on Error
Determines whether or not to stop printing and post a message
on the operator panel when the Retry County is exhausted
Yes
No
Yes is the default value.
Lexmark Confidential until announced
Understanding the RFID menu
9
