Understanding RFID printer messages
RFID error messages
Message
Action
44.00 RFID error (generic)
1
Turn the printer off.
2
Unplug the power cord.
3
Check all cable connections.
4
Connect the power cord to a grounded outlet.
5
Turn the printer on.
6
If the message recurs, call for service, and report the message
number and a description of the problem.
44.01 Bad tag error
•
Cancel the current job and reprint.
•
Contact the software program solution provider if the percentage of
failure seems high.
44.11 Data is bad
44.12 Missing bytes in subcommand
44.13 Too many bytes in subcommand
44.14 Generic invalid argument error
44.15 Invalid magic number
44.16 Known but unsupported magic number
44.17 Illegal characters in subcommand
44.18 Invalid opcode
44.19 Valid but unsupported opcode
44.20 Invalid protocol
44.21 Valid but unsupported protocol
44.22 Operation not supported by reader
44.23 Invalid ID length for given protocol
44.24 Invalid ID bit pattern for given protocol
44.25 Too many tags on page
44.26 Tag location parameters invalid
44.31 Generic run-time reader error
44.32 Reader response timeout
44.33 Garbled or short response from reader
44.34 Read/verify operation failed
Lexmark Confidential until announced
Understanding RFID printer messages
11
