manualshive.com logo in svg

Lexmark P122 Photo Jetprinter, Service Manual

The Lexmark P122 Photo Jetprinter is a high-quality printer designed for professional photo printing. For troubleshooting and maintenance, make sure to download the free Service Manual from our website, where you can find detailed instructions and solutions to common issues. Get the most out of your Lexmark P122 with our comprehensive manual available for download at manualshive.com.

Share
Download
background image

Repair Information

4-11

4102-P01

Ink Carrier Assembly Removal

1. Remove the top cover.

2. Remove the engine frame assembly.

3. Remove the left and right carrier rod clips {A}.

4. Slide the rod to the left and remove.

5. Remove the carrier cable from the retainer {B}.

6. Remove the carrier belt.

7. Remove the carrier.

Service.bk  Page 11  Tuesday, February 13, 2001  2:40 PM

Summary of Contents for P122 Photo Jetprinter







































































Reviews:

No comments

Related manuals for P122 Photo Jetprinter

Xerox 3270 Programmer'S Manual preview
3270
Brand: Xerox Pages: 34
Canon imagePROGRAF iPF760 Setup Manual preview
imagePROGRAF iPF760
Brand: Canon Pages: 12
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Setup Manual preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Brand: Canon Pages: 16
Canon imagePRESS C850 Practical Manual preview
imagePRESS C850
Brand: Canon Pages: 146
Canon imagePRESS C850 Quick Manual preview
imagePRESS C850
Brand: Canon Pages: 63
Canon imagePROGRAF iPF760 Basic Manual preview
imagePROGRAF iPF760
Brand: Canon Pages: 132
Canon imagePROGRAF iPF825 MFP Basic Guide No.1 Technical Documents preview
imagePROGRAF iPF825 MFP Basic Guide No.1
Brand: Canon Pages: 8
Canon imagePROGRAF TX-2000 Introductory Information preview
imagePROGRAF TX-2000
Brand: Canon Pages: 14
Canon i-SENSYS MF6180dw Manual preview
i-SENSYS MF6180dw
Brand: Canon Pages: 1040
Canon imagePROGRAF iPF815 Basic Manual preview
imagePROGRAF iPF815
Brand: Canon Pages: 48
Canon imageRUNNER 1025 Manual preview
imageRUNNER 1025
Brand: Canon Pages: 6
Canon imageRUNNER 2230 Specification preview
imageRUNNER 2230
Brand: Canon Pages: 6
Canon IMAGEPRESS C7010VPS Operating Information Manual preview
IMAGEPRESS C7010VPS
Brand: Canon Pages: 388
Canon imagePRESS C1 Installation Procedure preview
imagePRESS C1
Brand: Canon Pages: 56
Canon imagePROGRAF iPF8300 Basic Manual preview
imagePROGRAF iPF8300
Brand: Canon Pages: 24
Canon imagePROGRAF iPF8300 Brochure preview
imagePROGRAF iPF8300
Brand: Canon Pages: 4
Canon imagePROGRAF iPF6350 Setup Manual preview
imagePROGRAF iPF6350
Brand: Canon Pages: 12
Canon imagePROGRAF iPF6350 Specifications preview
imagePROGRAF iPF6350
Brand: Canon Pages: 2

Brands by name

Popular brands

Load more brands