Lexmark Optra N model 240, Service Manual

Page: 12 / 105

1-2
4040 Finisher
3. Close the stapler access door. Press Continue to Perform Sta-
ple Test appears on the operator panel display.
4. Select CONTINUE from the printer operator panel. Performing
Staple Test appears on the display. When the test page is deliv-
ered to the finisher, the finisher puts several staples along one
edge of the page. This primes the stapler for future jobs and
improves stapling reliability.
Tools
The removal and adjustment procedures described in this manual
require the following tools and equipment:
•
Magnetic tip Phillips screwdrivers, large and small
•
Flat-blade screwdriver
•
Analog volt ohmmeter (a digital volt ohmmeter may also be
used).
•
Oiler
•
Grease
•
Cleaning tissue
•
Ruler
When you make voltage readings, always use frame ground unless
another ground is specified.