Configuring your wireless print server
7
7
Disconnect the USB cable from both your computer and the print server.
8
Use the same cable to connect the print server to your printer. To make this connection, insert
the large end of the USB cable into the middle USB port on the back of the print server. Then,
insert the small end of the USB cable into your printer.
9
Click Next to continue with the Setup Utility Wizard.
10
Write down the port or MAC address information displayed on the screen This information will
be needed when installing your printer on the network.
11
Remove the Setup Utility CD from your computer and insert your printer’s Drivers or Printer
Software CD.
12
Click Finish to close the Setup Utility Wizard and proceed to
Installing your printer on the
network
.
