Lexmark MX-C357F User Manual Download Page 155

Page: 155 / 208

Action

Yes

Step 7

Access the Embedded Web Server.

Did the Embedded Web Server open?

The problem is
solved.

Contact your

dealer

Unable to read ﬂash drive

Action

Yes

Step 1

Check if the printer is not busy processing another job.

Is the printer ready?

Go to step 2.

Wait for the printer to
ﬁnish processing the
other job.

Step 2

Check if the ﬂash drive is inserted into the front USB port.

Note:

The ﬂash drive does not work when it is inserted into the

rear USB port.

Is the ﬂash drive inserted into the correct port?

Go to step 3.

Insert the ﬂash drive
into the correct port.

Step 3

Check if the ﬂash drive is supported. For more information, see

“Supported ﬂash drives and ﬁle types” on page 33

Is the ﬂash drive supported?

Go to step 4.

Insert a supported
ﬂash drive.

Step 4

Check if the USB port is enabled. For more information, see

“Enabling the USB port” on page 155

Remove, and then insert the ﬂash drive.

Does the printer recognize the ﬂash drive?

The problem is
solved.

Contact your

dealer

Enabling the USB port

From the control panel, navigate to:

Settings

Network/Ports

USB

Enable USB Port

For non-touch-screen printer models, press

to navigate through the settings.

Troubleshooting

155

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands