Lexmark MX-C357F User Manual Download Page 33

Page: 33 / 208

Print the document.

To print another document, select

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Supported ﬂash drives and ﬁle types

Flash drives

Notes:

–

The printer supports high

‑

speed USB ﬂash drives with full

‑

speed standard.

–

USB ﬂash drives must support the File Allocation Table (FAT) system.

Many ﬂash drives are tested and approved for use with the printer. For more information, contact the place
where you purchased the printer.

File types

Documents

•

PDF (version 1.7 or earlier)

•

HTML

•

XPS

•

Microsoft ﬁle formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)

Images

•

.dcx

•

.gif

•

.JPEG or .jpg

•

.bmp

•

.pcx

Printing

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands