Lexmark M124x Service Manual Download Page 29

Page: 29 / 318

Actions

Yes

Step 8

Reseat the connections.

Does the problem remain?

Go to step 9.

The problem is
solved.

Step 9

Note:

Poor electrical contact to the photoconductor is the most

likely source of a full page background defect.

Remove any contamination from the photoconductor charge
contact (C) on the right side of the frame.

Perform a print test.

Does the problem remain?

Go to step 10.

The problem is
solved.

Step 10

Check if the photoconductor charge contact is bent, damaged, or
not in proper contact with the imaging unit.

Is the contact free from damage and in proper contact with the
imaging unit?

Go to step 11.

Contact the next
level of support.

Step 11

Replace the power supply. See

“Power supply removal” on

page 216

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Blank pages check

4600-830, -835, -895

Diagnostics and troubleshooting

Summary of Contents for M124x































































































































































































































































































































Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands

Lexmark M124x, Service Manual

Search results

Summary of Contents for M124x

Reviews:

Related manuals for M124x

Brands by name

Popular brands