Lexmark CX331 User Manual Download Page 31

Page: 31 / 204

•

Load envelope with the ﬂap side down and against the right side of the paper guide.

Feed the paper until its leading edge gets pulled in.

Warning—Potential Damage:

To avoid paper jams, do not force paper into the manual feeder.

Installing and updating software, drivers, and ﬁrmware

Installing the printer software

Obtain a copy of the software installer package.

•

From the software CD that came with your printer.

•

Go to

http://support.lexmark.com

, and then select your printer and operating system.

Run the installer, and then follow the instructions on the computer screen.

For Macintosh users, add the printer.

Note:

Obtain the printer IP address from the home screen.

Updating ﬁrmware

Some applications require a minimum device ﬁrmware level to operate correctly.

For more information on updating the device ﬁrmware, contact your Lexmark representative.

From the Embedded Web Server, click

Settings

Device

Update Firmware

Browse to locate the required ﬂash ﬁle.

Apply the changes.

Exporting or importing a conﬁguration ﬁle

You can export the conﬁguration settings of your printer into a text ﬁle, and then import the ﬁle to apply the
settings to other printers.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

Set up, install, and conﬁgure

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands