Maintaining the printer
Warning—Potential Damage:
Failure to maintain optimum printer performance periodically, or to replace
parts and supplies, may cause damage to your printer.
Adjusting the speaker volume
Adjusting the default internal speaker volume
The speaker volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power
‑
on reset.
1
From the control panel, navigate to:
Settings
>
Device
>
Preferences
>
Audio Feedback
2
Select the volume.
Note:
If Quiet Mode is enabled, then audible alerts are turned off.
Adjusting the default headphones volume
Headphones volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power
‑
on reset.
1
From the control panel, select
Settings
>
Device
>
Accessibility
>
Headphone Volume
.
2
Select the volume.
Networking
Note:
Purchase a MarkNet(TM) N8360 wireless network adapter first before setting up the printer on a
wireless network. For information on installing the wireless network adapter, see the setup sheet that came
with the adapter.
Connecting the printer to a wireless network using Wi
‑
Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS
‑
certified or WPS
‑
compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
Maintaining the printer
34
Summary of Contents for CS820 Series
Page 1: ...CS820 CS827 User s Guide October 2017 www lexmark com Machine type s 5063 Model s 530 571...
Page 74: ...2 Remove the jammed paper Note Make sure that all paper fragments are removed Clearing jams 74...
Page 80: ...4 Close the staple guard 5 Insert the staple cartridge holder 6 Close door G Clearing jams 80...