Action
Yes
No
Step 3
a
Depending on your operating system, specify the paper type,
texture, and weight from the Printing Preferences or Print
dialog.
Notes:
•
Make sure that the settings match the paper loaded in
the tray.
•
You can also change the settings on the printer control
panel.
b
Resend the print job.
Is the print still too light?
Go to step 4.
The problem is
solved.
Step 4
Make sure that the paper has no texture or rough finishes.
Are you printing on textured or rough paper?
Change the texture
settings to match the
paper you are
printing on.
Go to step 5.
Step 5
a
Load paper from a fresh package.
Note:
Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
b
Resend the print job.
Is the print still too light?
Go to step 6.
The problem is
solved.
Step 6
Replace the imaging unit or imaging kit, and then resend the print
job.
Warning—Potential Damage:
Do not expose the imaging unit or
imaging kit to direct light for more than 10 minutes. Extended
exposure to light can cause print quality problems.
Warning—Potential Damage:
To avoid damage, do not touch the
underside of the imaging unit or imaging kit.
Is the print still too light?
Contact
The problem is
solved.
Mottled print and dots
ABC
DEF
Troubleshooting
103
Summary of Contents for CS820 Series
Page 1: ...CS820 CS827 User s Guide October 2017 www lexmark com Machine type s 5063 Model s 530 571...
Page 74: ...2 Remove the jammed paper Note Make sure that all paper fragments are removed Clearing jams 74...
Page 80: ...4 Close the staple guard 5 Insert the staple cartridge holder 6 Close door G Clearing jams 80...