Lexmark 248X-200 series, Service Manual

Page: 26 / 172

2-8
Service Manual
24XX-200
The Load/Unload
button does not
function when the
push tractor is
installed.
Form feed length is
not correct.
The Load/Unload
button functions
when cut sheets are
being used.
Be sure the Paper Select lever is in the correct
position.
Go to “Paper Select sensor service check” on
page 2-26 .
Continuous forms
feed, but cut sheets
fail to load. Be sure the Paper Select lever is in the cut sheet
position.
Verify that continuous forms have been parked
using the Load/Unload button.
Be sure Auto Cut Sheet is enabled in the Setup
mode.
Go to “Paper Select sensor service check” on
page 2-26 .
The Load/Unload
button functions
when the pull tractor
is installed.
The Paper Out lights
blinks and the
FormFeed button
does not operate
until paper is located
at first print line.
Be sure the Paper Select lever is in the tractor
position.
Go to “Pull Tractor sensor service check” on
page 2-32 .
Symptom Action