4-30
Lower Feed Roller Removal
1. Remove the tractor assembly
see
“Push Tractor Assembly Removal” on page 4-53
.
2. Remove the top cover
see
“Top Cover Removal” on page 4-61
.
3. Remove the pull tractor actuator
see
“Pull Tractor Removal” on page 4-50
.
4. Remove the paper select lever
see
“Paper Select Lever Removal” on page 4-42
.
5. Remove the printhead
see
“Printhead Removal” on page 4-48
.
6. Remove the sub logic board
see
“Sub Logic Board Removal” on page 4-59
.
7. Remove the paper feed motor
see
“Paper Guide / Platen Assembly Removal” on page 4-40
.
8. Remove the carrier see
“Carrier Removal” on page 4-12
.
9. Remove the upper feed roller
see
“Upper Feed Roller Removal” on page 4-66
.
10. Remove the lower pinch roller
see
“Lower Pinch Roller Removal” on page 4-32
.
11. Remove the gears on the right side frame
see
“Right Side Frame Gears Removal” on page 4-58
.
12. Remove the print unit see
“Print Unit Removal” on page 4-47
.
13. Remove the right side frame
see
“Right Side Frame Removal” on page 4-56
.
14. Remove the idler gear [1], then remove the left feed roller lower
gear [2].
15. Release the latch, and then remove the left lower bushing [3].
16. On wide carriage machines remove the ground strap from the
center of the platen.
17. Release the notch on the left of the lower feed roller [4] from tab
[A] on the left side frame, and then remove the lower feed roller.
18. Be sure to perform the Printhead-to-Platen Gap Adjustment
see
“Printhead-to-Platen Gap Adjustment” on page 4-2
.
23xx.bk Page 30 Wednesday, March 13, 2002 10:42 AM
Summary of Contents for 2380 - Forms Printer B/W Dot-matrix
