30
45D0028
45D0028
31
CLEANING
AND
MAINTENANCE
Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a cold startup. This is normal
for all gas fireplaces and stoves. This condensation often attracts dust and lint to the surface of the glass. The initial paint
curing of the appliance can also leave a slight film on the glass. This is a temporary problem.
Your should clean the glass after the first two weeks of use. After that, you should clean the glass no more than two or three times
a season. Use a mild glass cleaner to clean the door. Do not use abrasive cleaners. They will damage the glass surface.
PILOT AND BURNER FLAMES
Visually check pilot and burner flames periodically.
See Figure 43
for typical burner flame.
See Figure 44
for typical
pilot flame.
Let glass cool before cleaning. Do not
clean glass when it is hot. Damage
could occur.
CAUTION
Make sure the gas valve knob is in the “OFF” position. Wait at least five (5) minutes before start-
ing maintenance.
VENTING SYSTEM
A qualified agency should examine the venting system annually.
CLEANING GLASS
Make sure clearances to combustibles
leave room for maintenance and
service.
W
ARNING
Carefully reassemble and reseal
stove properly after any cleaning or
servicing.
W
ARNING
FIREBOX CLEANING
1. Carefully remove grate, log set, and embers from com-
bustion chamber.
2. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace grate, log set, and embers in their
correct positions.
See pages 25 through 27.
6. Replace door (if it has been removed).
7. Relight pilot.
See page 28.
8. Turn on main burner.
Figure 43 - Typical Burner Flame
Figure 44 - Typical Pilot Flame
Thermopile
Thermocouple
Summary of Contents for CONCORDE C28DV
Page 34: ...34 45D0028 REPLACEMENT PARTS ...
Page 38: ...38 45D0028 NOTES ...
Page 39: ...45D0028 39 NOTES ...
