6
3.6 To remove the main unit from the bracket, press the top part of the bracket and
take it out.
4. General Operation Instructions
4.1 Powering On/Off and Charging
• Power On
P
ress and hold both the A button and Jog Dial simultaneously for about 2 seconds.
The LED will blink blue. You will hear the voice announcement about the current
battery life.
• Power Off
P
ress and hold both the A button and Jog Dial simultaneously for about 2 seconds.
The blue LED will turn red, then off.
• Charging
Plug the USB cable into the USB port. The LED turns red while charging, and will
turn solid blue when fully charged. It takes about 2.5 hours to be completely charged.
• Low Battery Alert
When the battery power drops below 20%, about 1-1.5 hours of use remains, and a
beep tone will sound every 5 minutes.
4.2 Pairing the LX-FT4 with a Bluetooth Device
Start with the unit powered off, press and hold the A button for about 3 seconds until
the LED begin flashing blue and red. Follow the source devices instructions to
connect. After the source device has been paired, the LX-FT4 will automatically
connect when it is turned on and the Bluetooth is enabled on the source. To manually
connect, simply click the Jog Dial to connect with the audio source.
• Pairing a Mobile Phone
Step 1. Start with the unit powered off, press and hold the A button for about 3
seconds until the LED begin flashing blue and red.
Step 2. Search for Bluetooth devices on your mobile phone. The headset will be listed
on your mobile phone as “LX-FT4”.
Step 3. Enter 0000 for the PIN if needed.
Step 4. Your mobile phone will confirm that pairing is complete. The blue LED blinks
after they are connected.
