background image

18

Preset and store up to 6 FM radio stations

In FM radio mode, when a favorite station is found, click the Jog Dial to save. A beep

tone will sound. Preset and store up to 6 FM radio stations. Once 6 stations have been

saved, saving a new station will overwrite the oldest saved station. Click the A button

to rotate between each saved station.

5.6 Function Priority

The LX-FT4 operates in the following order of priority:

1. Mobile phone

(highest)

2. Intercom

3. Bluetooth stereo music, FM radio

(lowest)

A lower-priority function is always interrupted by a higher-priority function. For

example, stereo music is interrupted by an Intercom call, and Intercom intercom talk

is interrupted by an incoming mobile phone call.

5.7 Reset

To clear the previous pairing, press A and B button simultaneously until the LED

flashes red.

5.8 Battery Life Prompt

Every time you turn on the unit, it will automatically report the current battery life.

Double click A button to repeat the battery life notification.

It will report one of five levels: 100% / 80% / 50% / 30% / LOW

5.9 Change LED Color

To change LED color, press both the Jog Dial and B button, it will cycle Blue on, Red

on, Red flashing, Purple on, Purple flashing, and Bluetooth indicator light. Only when

in Bluetooth indicator light mode, you can see the changes for Bluetooth pairing or

other settings.

Note: LED color changing mode drains battery faster than usual , so please only

use it when needed.

6. Maintenance and Care

The LX-FT4 should be treated with care and the following suggestions will help maintain your
Warranty.
6.1. Do not use or store the device in dusty or dirty environments. Moving parts and electronic
components can be damaged.
6.2. Do not store the device in high heat areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
6.3. Do not store the device in cold temperature areas. When the device returns to its normal
temperature moisture can form inside the device and damage electronic circuit boards.
6.4. Do not attempt to open the LX-FT4 case.

Summary of Contents for LX-FT4

























Reviews: