Lexicon PCM NATIVE CHAMBER, Owner'S Manual

Page: 15 / 44

7
Graphic Display
Shows the EQ in a graphic form. The active section (Early or Late) is in the forefront.
Early/Late Selectors
These buttons select which EQ section is currently being edited. ‘Early’ includes reflections,
direct echo outputs and room patterns. ‘Late’ includes the reverb tail.
EQ Type Selector
Allows any of six types of EQ to be applied to the active section. Those types are:
• Single-pole lowpass (6db / Octave)
•
Single-pole highpass (6db / Octave)
• Double-pole lowpass (12db / Octave)
• Double-pole highpass (12db / Octave)
•
Bandpass
• Notch
Level Control
Overall output level of the active section. These may be edited by holding the mouse down and
moving up and down over the knob. Alternatively, the value field may be directly edited.
EQ Parameters
Frequency, shelf and bandwidth parameters of the active section. To edit these, click and hold
on the knob, then move the mouse up or down. Alternatively, the value field may be directly
edited. The bandwidth knob is only available when the filter type is Bandpass or Notch.