Lexicon MC-8, User Manual, Page: 72 / 171

CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SETUP
MC-8
3-31
REAR L/R
FULL, 30Hz to 120Hz, THX 80Hz, NONE
Opens the REAR L/R SPEAKERS menu shown above, which can be
used to select a crossover point for the Main Zone audio output
connectors labeled Rear L/R. When set to FULL, the MC-8 sends a
full-range audio output signal to these connectors. Otherwise, the
MC-8 activates a crossover point at the selected setting. Choose
the setting closest to the low-frequency rating of the associated
speakers.
When set to NONE, the MC-8 redirects rear channel signals to the
Main Zone audio output connectors labeled Side L/R. If the
CUSTOM SETUP menu SIDE L/R parameter is also set to NONE, the
MC-8 redirects surround channel signals to the Main Zone audio
output connectors labeled Front L/R.
REAR L/R CUSTOM SETUP SPEAKERS SETUP
Note:
When the REAR L/R parameter is set to NONE:
• Dolby Digital Surround EX, THX Ultra2, THX
Surround EX, and dts-ES decoding are not
available.
• The ASA parameter is not available.
. . . Custom Speaker Setups continues on page 3-32
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
REAR L/R 60Hz
REAR L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE