7
8. 48v PhantOM POwer ButtOn
This button enables the phantom power to the Mic/Line inputs on either
side of it. When it's on, the +48V LED between the corresponding Gain
knobs lights on the front panel. Dynamic microphones do not require
phantom power to operate, but are not harmed by it. Most condenser
microphones do require phantom power to operate. If you are unsure about
the phantom power requirements for your microphone, consult your micro-
phone’s documentation or contact the manufacturer. This switch should be
OFF if you are connecting any line-level source to the Mic In jacks.
9. heaDPhOne 1 anD heaDPhOne 2 JacKS
The Headphone outputs accommodate stereo headphones with a 1/4" stereo
plug. These outputs are the same as those sent to the Main Outputs, but
with their own independent level controls.
