8
ENGLISH
CLOCK
By default, you are in Clock mode. You are in Clock mode when time is displayed on screen.
1. In Clock mode, press and hold SET (6) for 3 seconds. The digit of hours starts flashing.
2. Press + (2) or – (3) to change the setting value. Then press SET to confirm and to move to the next
setting. The setting sequence is displayed in the following order:
Hours Minutes Year Month Date input language for the day of the week
Notes:
- While setting the date, the day of the week will automatically change.
- In any setting mode, if no key is pressed for more than 1 minute, the radio projector clock will automatically
exit the current mode and go back to Clock mode, displaying time and date.
3. When you have finished setting up the clock, press + repeatedly to switch between 12 and 24-hour display
(“AM/PM” appears on the left in 12-hour clock display).
ALARM
1. Press MODE to switch to alarm mode: “AL” appears on the upper left corner of the screen.
2. Press and hold SET for 3 seconds. The digit of hours starts flashing.
3. Press + and - to change the setting value. Then press SET to confirm and to move to the next setting. The
setting sequence is displayed in the following order:
Hours Minutes Radio/Nature sound
4. If you have selected “Nature sound”:
- to choose the alarm sound, press SOUND (1) repeatedly to listen to the different nature sounds.
- when you have chosen one, press and hold SOUND for 3 sec to turn off the sound.
- the last sound you have listened to becomes the alarm sound.
Unpacking the device
When unpacking, ensure that the following elements are included:
1 x Radio Projector Clock
1 x Instruction manual
WARNING:
All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this
product and should be discarded.
Settings
