LEXIBOOK LBOX100EN, User Manual

Page: 17 / 64

16 17
16
Connecting the controller:
1. Activate the left-hand or right-hand mode using the left-hand/right-hand switch
(11).
2. Ensure that the television set and the LexiBox® are turned on.
17
3. Follow the instructions on the screen. Press the controller power button (13)
for 4 seconds. The connection indicator (21) will start to blink.
4. Once the controller is connected to the main unit, the connection indicator will
stop blinking and will stay lit.
Remark: Once you have first successfully connected your controller to the main unit,
you will now simply have to press the controller power button to use the LexiBox® ®
again.
Remark:
When the red LED indicator is lit, the batteries must be changed. Should a
problem occur, please consult section "6. Troubleshooting Guide".
Initial Start-Up
1. Ensure that the wireless controller is connected to the LexiBox® main unit.
2. The language selection page is displayed.
3. Move the joystick (14) to the left or right to select the desired language and
press the button (20) to confirm your selection.
Remark: This screen appears only during the initial start-up, but you can change the
language at any time in the settings.
4. Pay close attention to the help video, as it contains lots of useful information!
5. After the introductory video, you will go to the profile selection screen.
It is recommended to first go to the parental controls to define a parental
password. (The default password is 123456).
LBOX100ENIM1364_5Sept_V05.indd 17 05/09/2014 4:53 PM